For perfect mouldings, you must start with perfect grinding templates.
800-759-6268
516-595-7495
For perfect mouldings, you must start with perfect grinding templates.
Phone: 1-800-759-6268
Video Training
The following videos will show you exactly how to use the AutoTEMP system to make Grinding Templates.
- We start with a simple 2″ x 2″ box, teach you how to zoom and scroll in the program, then progressively move along adding new components from the 140 tools TurboCAD has available.
- Once you have completed the videos you will be able to scan wood samples or drawings and trace them using the lines and radii in TurboCAD. You will be able to generate dimensioned drawings and you will understand how to create a template with run off. We will show you how to nest the templates and how to run the templates in the AutoTEMP program. We will also have videos that show how to convert a template into a drawing for a pressure shoe and how to run the pressure shoe.
- This video training is not designed to use all of the icons available in TurboCAD. It was designed to show you how to make templates, but does incorporate most of the icons you will need to do most drawings.
- The program is only available to customers that have purchased one of the AutoTEMP systems.
To Start This Training Session:
STEP 1 – Click Here to Download & Install Course Materials / Alternate Access to Course Materials
– To assist with the training process, open the appropriate drawing in the downloaded files to follow along with the videos.
– The DXF files can be opened in TurboCAD, the PDF files can be printed on your printer.
STEP 2 – Print Training Steps Combined 0817.pdf (from downloaded files)
STEP 3 – Click on the first video – Toolbars & Classic Mode
VIDEO LIBRARY
Toolbars & Classic Mode 
Setting Toolbars to classic mode
Resources needed:
None
Drawing 1
Drawing a 2″ x 2″ box. Using line, length and Angle. Using V snap.
Open drawing 01.DXF
Resources needed:
Open Drawing 01.DXF
Print Drawing 01.PDF
Turning Off Snaps
Turning off Snaps and Geometric aids & turning them back on
Resources needed:
None
Drawing 2
Drawing 2″ x 2″ box, then adding Fillets and Chamfers to the corners
Resources needed:
Open Drawing 02.DXF
Print Drawing 02.PDF
Zooming
Moving around and zooming in and out of the drawing in TurboCAD.
Resources needed:
None
Drawing 3
VIDEO NOT CORRECT
Resources needed:
*Resource One
*Resource Two
Drawing 4
Drawing using Parallel lines. Introduction to Meet 2 lines. Adding Fillets
Resources needed:
Open Drawing 04.DXF
Print Drawing 04.PDF
Use Choice
Turning off annoying Popups & turning back on.
Resources needed:
None
Drawing 5
New drawing using Line, Length, Angle & Parallel lines. Intro to circles. Using I snap.
Resources needed:
Open Drawing 05.DXF
Print Drawing 05.PDF
Drawing 6 (Pt.1)
Multi-part drawing. First part is Creating the initial box. Also Intro to M snap.
Resources needed:
Open Drawing 06.DXF
Print Drawing 06.PDF
Drawing 6 (Pt. 2)
Part 2 – Cutting a Line and then using meet 2 lines to connect line to radius
Resources needed:
Continue with Drawing 06.DXF
Continue with Drawing 06.PDF
Drawing 6 (Pt. 3)
Part 3 – Using the Mirror Function to copy one part of the drawing and keep the original.
Resources needed:
Continue with Drawing 06.DXF
Continue with Drawing 06.PDF
Drawing 6 (Pt. 4)
Part 4 – Deleting a mirror line. Create a Hatch pattern using pick/ point/ hatch.
Resources needed:
Continue with Drawing 06.DXF
Continue with Drawing 06.PDF
Drawing 7 (Pt. 1)
Part 1 Summary drawing of all icons used to this point. Line length angle to create initial part.
Resources needed:
Open Drawing 07.DXF
Print Drawing 07.PDF
Drawing 7 (Pt. 2)
Part 2 – Final part of Summary drawing. Adding Arcs, cut line and using mirror function.
Resources needed:
Continue with Drawing 07.DXF
Continue with Drawing 07PDF
Drawing 8
How to add a template to a wood sample using parallel lines. Axial Constant
Resources needed:
Open Drawing 08.DXF
Print Drawing 08.PDF
Drawing 9
Creating blend lines on a template with radii at each side. Axial Constant.
Resources needed:
Open Drawing 09.DXF
Print Drawing 09.PDF
Drawing 11 (Pt. 1)
Practice – Part 1 – Drawing a simple drawer side with notch. Line, length, angle.
Resources needed:
Open Drawing 11.DXF
Print Drawing 11.PDF
Drawing 11 (Pt. 2)
Practice – Part 2 – Drawing with radii at end. Line, length, angle, Meet 2 lines and Fillet.
Resources needed:
Continue with Drawing 11.DXF
Continue with Drawing 11.PDF
Drawing 12
Practice – Drawing a shape with Chamfers and a groove. Line, Length, angle and chamfer
Resources needed:
Open Drawing 12.DXF
Print Drawing 12.PDF
Drawing 13
Practice – Drawing a moulding with chamfers and a series of parallel lines also meet 2 lines
Resources needed:
Open Drawing 13.DXF
Print Drawing 13.PDF
Drawing 14
Practice – Drawing with 2 radii. Finding center of radii using parallel lines. Color Change Lines.
Resources needed:
Open Drawing 14.DXF
Print Drawing 14.PDF
Drawing 15
Practice – Advanced drawing lots of dimensions. Line, length, angle.
Resources needed:
Open Drawing 15.DXF
Print Drawing 15.PDF
Drawing 16
Practice – Advanced Drawing. Line, length, angle, Parallel lines, radii, split line, meet 2 lines.
Resources needed:
Open Drawing 16.DXF
Print Drawing 16.PDF
Drawing 17
Practice – Final Drawing – Advanced. Line, length, angle. Fillet
Resources needed:
Open Drawing 17.DXF
Print Drawing 17.PDF
Contact Information:
Isel USA
Toll Free: 800-759-6268
Office: 516-595-7495
Email: sales@templatemakers.com
Address: 69 Bloomingdale Rd
Hicksville, NY 11801